In-frame ventilators
Exterior/interior ventilators for window frames
Extraction vents
Kitchen, bathroom,and WC extraction
Airflow circuit components
Integrated airflowcontrol modules
Air intakes and outlets
Foul air outletroof components
Natural ventilation grilles
Exterior facadeair intake grilles
Kit SRT+ = SRT+ + ISOLA + plastic adjusting sleeve + finish plate + 200mm PVC sleeve + GAP 125 6 + 2 screws + installation instructions (individual cardboard packaging)
The SRT+ silencer is made entirely from sheet steel and fits into all types of infill after making a circular hole in the wall and sealing in a Ø125mm PVC sleeve. It is fitted in the interior of the infill in conjunction with an adjusting sleeve.
Model SRT+ 30/57 is used in conjunction with an ISOLA 2 self-regulating air inlet with (flow rating 22 or 30 m³/h).
Model SRT+ 45/54 is used in conjunction with an ISOLA 2 self-regulating air inlet (flow rating 45m³/h) or an ISOLA HY humidity controlled air inlet.
Make a hole in the wall and seal in a Ø125mm PVC sleeve sloping slightly toward the exterior.
Outside, once the sealing is complete, clip on the louvre grille.
Fit the silencer to the wall with the 2 fastening lugs on the sides.
Make sure the sides of the SRT+ are lagged to ensure a thermal break.
The MPR sleeve must have at least 10mm of its length inside the silencer. The SRT+ can be installed in infills of thickness 80+10mm to 100+10mm. For deeper infills, a second adjusting sleeve will be required.