ANJOS VENTILATION - RDR HP Ø 160 MM

RDR HP Ø 160 MM

151-600Pa

< Back to Airflow circuit components - High pressure adjustable flow regulators 151-600Pa

Description

Packg. *

Code

RDR HP 75 m³/hour Ø 160, 3 shims	8	9738
RDR HP 150 m³/hour Ø 160, 2 shims	8	9740
RDR HP 200 m³/hour Ø 160, 1 shim	8	9741
RDR HP 250 m³/hour Ø 160, 1 shim	8	9742
RDR HP 300 m³/hour Ø 160, 1 shim	8	9743
RDR HP 350 m³/hour Ø 160	8	9744
RDR HP 400 m³/hour Ø 160	8	9745
RDR HP 450 m³/hour Ø 160	8	9746
RDR HP 500 m³/hour Ø 160	8	9747

* packaged quantities are shown for information purposes – All items can be ordered singly

RDR HP 75 m³/hour Ø 160, 3 shims

Technical sheet RDR HP

RDR HP adjustable flow regulators are made from class M1 plastic suitable for use at temperatures up to 60°C.

They can be set to the required flowrate in-situ to provide a predetermined airflow in a pressure range of 150–600 Pascals.

The flow regulator fits directly inside a vertical or horizontal duct. For horizontal ducts ensure the bottom (“BAS”) direction indicated on the front of the regulator faces downward. A lip seal ensures air tightness.

Do not twist, push, or otherwise force the moving flap (the regulating element) when fitting. Compliance with the airflow direction indicated on the adapter is vital.

When the regulator is used in conjunction with an air diffusion vent, the distance between the vent and regulator must be at least equal to the duct diameter for air extraction and at least three times the duct diameter for air supply.

RDR regulator in air supply

RDR regulator in air extraction

Before fitting the regulator, the flowrate must be calibrated:

• Slacken off the locking screw on the flow regulation module with a Torx No.10 screwdriver

• Align the setpoint marking (on the left or right of the module) with the required flowrate

• Tighten the locking screw on the flow regulation module

Intermediate flowrates are possible by aligning the setpoint marking between graduations on the regulator.

Flow regulator model	Setpoint intervals
RDR HP ø 80	5 m³/h
RDR HP ø 100	8 m³/h
RDR HP ø 125	10 m³/h
RDR HP ø 160 - 200 -250	25 m³/h

RDR HP Ø 80 and 100 mm

Example of 90m³/h setting:

setpoint marking on regulator aligned with “90” graduation on the left side

RDR HP Ø 125–250 mm

Example of 300m³/h setting:

setpoint marking on regulator aligned with “300” graduation on the left side

RDR ASSEMBLY COMPONENTS AND FLOWRATES

RDR	Assembly	Flowrates (m³/h)	Set flowrate (m³/h)	Code
ø 80	RDR HP ø 80	15–50	50	9404
ø 100	RDR HP ø 80 + 1 shim	15–50	50	9409
ø 125	RDR HP ø 100	50–100	100	9413
ø 125	RDR HP ø 80 + 2 shims	15–50	50	9419
ø125	RDR HP ø 100 + 1 shim	50–100	100	9423
ø125	RDR HP ø 125	100–180	180	9427
ø 150	RDR HP ø 80 + 3 shims	15–50	50	9430
ø 150	RDR HP ø 100 + 2 shims	50–100	100	9431
ø150	RDR HP ø125 + 1 shim	100–180	180	9434
ø 150	RDR HP ø 150	180–300	300	9439
ø 160	RDR HP ø 80 + 3 shims	15–50	50	9440
ø 160	RDR HP ø 100 + 2 shims	50–100	100	9441

RDR	Assembly	Flowrates (m³/h)	Set flowrate (m³/h)	Code
ø 160	RDR HP ø 125 + 1 shim	100–180	180	9444
ø 160	RDR HP ø 150	180–300	300	9449
ø 200	RDR HP ø 80 + 4 shims	15–50	50	9455
ø 200	RDR HP ø 100 + 3 shims	50–100	100	9456
ø 200	RDR HP ø 125 + 2 shims	100–180	180	9457
ø 200	RDR HP ø 160 + 1 shim	180–300	300	9464
ø 200	RDR HP ø 200	300–500	500	9468
ø 250	RDR HP ø 100 + 4 shims	50–100	100	9475
ø 250	RDR HP ø125 + 3 shims	100–180	180	9476
ø 250	RDR HP ø 160 + 2 shims	180–300	300	9477
ø 250	RDR HP ø 200 + 1 shim	300 à 500	500	9483
ø 250	RDR HP ø 250	450–750	700	9488