Customer login Contact
In-frame ventilators Acoustic Self-regulating units
Mini ÉSEA - Self-regulating units with noise suppression

Mini ÉSEA - Self-regulating units with noise suppression

< Back to In-frame ventilators - Acoustic Self-regulating units
Description Colour Packg. * Code
Window inlet kit
Mini ÉSEA 15 + CEA
select
66 0844
Mini ÉSEA 22 + CEA
select
66 0845
Mini ÉSEA 30 + CEA
select
66 0846
Mini ÉSEA 15 RA-ME + CEA
select
42 0876
Mini ÉSEA 22 RA-ME + CEA
select
42 0877
Mini ÉSEA 30 RA-ME + CEA
select
42 0878
Mini ÉSEA 15 + CEA + 4 screws + 2 screw covers
select
66 0847
Mini ÉSEA 22 + CEA + 4 screws + 2 screw covers
select
66 0848
Mini ÉSEA 30 + CEA + 4 screws + 2 screw covers
select
66 0849
Accessories
Mini CFA (anodized aluminium) 84 0808
Mini CFA (white lacquered aluminium) 84 0809
Mini CFA (aluminium black lacquered) 84 0810
* packaged quantities are shown for information purposes – All items can be ordered singly
Mini ÉSEA 15 + CEA
Dn,e,w (Ctr) 
          
   38 to 42 dB 15 and 22m3/h
 37 to 39 dB 30m3/h 

Mini CFAmore information

Slot (in mm) 250 x 12
  172 x 12 except Mini ESEA 30

The Mini ESÉA acoustic self-regulating air inlet for fitting indoors is made from white polystyrene. The insect screen function of the grille is directly provided by the inlet airflow. For installation in main rooms (living and bedroom) to supply air renewal to single flowrate forced ventilation systems.

Available in flowrates of 15, 22, or 30m³/h. The 15m³/h air inlet provides additional flowrates of 22 or 30 m³/h and the 22 m³/h allows up to 30 m³/h.

It works both on vertical walls and on inclined planes (e.g., roof skylights, undersides of roller shutter boxes).
The cowl for fitting to the external wall is made from UV- and weather-resistant polystyrene in the same colours as the air inlets.
Exclusively for fitting to surfaces sheltered from bad weather. For non-sheltered surfaces please enquire with us.

On the inside, the base of the air inlet (Mini ESEA) or the muffler extension (Mini ESEA RA-ME) is held in place over the 250 x 12 slot by 2 screws. The cap is a push-fit.

On the outside, the cowl is centred on the 250 x 12mm or 172 x 12mm slot and held in place by 2 screws (horizontal fitting).

The components must be kept easily accessible for cleaning and maintenance.
CSTB test reports VE-AC10-26030789
 Acoustic insulation on size: 250 x 12 mm 172 x 12 mm
 Type Dn,e,w (C) Dn,e,w (Ctr) Dn,e,w (C)  Dn,e,w (Ctr)

Mini ÉSÉA 15 + CEA1

  37 dB 38 dB 39 dB 39 dB

Mini ÉSÉA 22 + CEA1

 37 dB 38 dB 39 dB 39 dB
Mini ÉSÉA 30 + CEA1 37 dB 37 dB    

Mini ÉSÉA 15 RA-ME + CEA

 40 dB 40 dB 42 dB 42 dB

Mini ÉSÉA 22 RA-ME + CEA

 40 dB 40 dB 42 dB 42 dB

Mini ÉSÉA 30 RA-ME + CEA

 39 dB 39 dB    


Similar characteristics apply without external wall cowl

1 certified product

Mini-ESÉA 15/22/30 m³/h air inlets: the inlet airflow rate is determined by the snap-off tabs (marked 15, 22, and 30) on the two regulator bar holding clips. The lowest remaining value indicates the flowrate.

The 15m³/h model can also be modified in-situ to provide flowrates of 22 or 30 m³/h by carefully breaking off the relevant snap-off tabs. Break the 2 tabs marked 15 to obtain 22m³/h and the 2 tabs marked 22 to obtain 30 m³/h.

The 22m³/h model can also be modified in-situ to provide a flowrate of 30 m³/h by carefully breaking off the relevant snap-off tabs. Break the 2 tabs marked 22 to obtain 30 m³/h.

  
Air inlet sizing: see general information tab