Customer login Contact
In-frame ventilators Humidity controlled units with noise suppression
EM HY - Acoustic humidity controlled units

EM HY - Acoustic humidity controlled units

< Back to In-frame ventilators - Humidity controlled units with noise suppression
Description Packg. * Code
Window inlet kit
EM HY 100 + adapter L = 300 + GAP 100 70 2220
EM HY 125 + adapter L = 300 + GAP 125 70 2221
Accessories
SC 125 EM HY (Dn,e,w (Ctr) = 47 dB) 70 2224
* packaged quantities are shown for information purposes – All items can be ordered singly
EM HY 100 + adapter L = 300 + GAP 100
Dn,e,w (Ctr) 
          
  39 dB   

SCmore information

Cut-out Ø100, Ø125 mm

In the scope of an ALIZÉ 2018 humidity controlled ventilation system (Technical Appraisal 14.5/17-2269 and 14.5/17-2268), EM HY air inlets are used in conjunction with the system’s humidity controlled or timed extraction vents.
They are characterized by a flowrate varying from 5–45 m³/hour (at 20Pa pressure head) in line with the room’s humidity variations.
The EM HY humidity controlled acoustic air inlet (100 or 125mm), installed on the indoor

side, is made from white polystyrene. For installation in main rooms (living and bedroom) to supply air renewal in humidity controlled, single flowrate forced ventilation systems.
The GAP external wall grille is made from UV- and weather-resistant white polystyrene .

Make a hole in the wall and seal in a steel sleeve Ø125mm (max ID Ø125, min ID Ø120) or Ø100mm (max ID Ø100, min ID Ø97) sloping slightly toward the exterior. Once the sealing is complete, screw the adapter for the GAP 125 grille in place and clip the grille to it. Plug the air inlet into the duct.

 

 
Acoustic insulation
 Type Dn,e,w (C) Dn,e,w (Ctr)
EM HY ø 100 + GAP 100 40 dB 39 dB
EM HY ø 125 + GAP 125 40 dB 39 dB
Humidity controlled ventilation systems (Technical Appraisal 14.5/17-2269 and 14.5/17-2268) and sizing of air inlets: see general information tab.